G2 → G1 STUDY PATH

    G2 TO G1: THE FLAMEPATH STUDY PATH

    You've got your G2. You're working 50-hour weeks. You don't have time to study wrong. This is the exact path G2-certified Ontario gas fitters take to pass the TSSA G1 — without a college course, without wasting weekends.

    WHAT THE G1 UNLOCKS

    HIGHER PAY

    G1 fitters in Ontario typically earn $8–$15/hr more than G2. Commercial work pays.

    INDUSTRIAL INSTALLS

    Power burners, commercial boilers, hospitals, schools, food processing — work G2s legally can't touch.

    TOP-TIER TITLE

    G1 is the ceiling of the Ontario gas fitter trade. There is no higher license.

    THE CERTIFICATION GAP FROM G2 TO G1

    G2 covered residential systems up to 7 psi. G1 covers everything above that — high-pressure trains, commercial burners, BMS, commercial venting categories III & IV. Roughly 60% of G1 content is new territory if you've only worked residential.

    • High-pressure gas piping & regulators (new)
    • Double block & bleed gas trains (new)
    • Burner Management Systems / flame supervision (new)
    • Commercial venting categories III & IV (expanded)
    • Power & forced-draft burners (new)
    • Commissioning documentation per TSSA (new)

    HOW FLAMEPATH CLOSES THE GAP

    WEEKS 1–3

    Close the residential-to-commercial gap

    Re-anchor the B149.1 sections that mattered less for G2 — high-pressure systems, double block & bleed, commercial venting categories.

    WEEKS 4–7

    Drill gas trains & BMS daily

    These are the two highest-failure topics on the G1. Flamepath drills them with question-by-question repetition until you stop missing them.

    WEEKS 8–10

    Power burners & commissioning

    Learn the sequence of operation cold. Walk through commissioning checklists until you can recite the order without thinking.

    WEEKS 11–12

    Timed mock exams

    Two timed mock G1 exams per week. When you hit 90%+ twice in a row, you book.