TSSA G2 · Ontario · Reviewed 2026-09-08

    TSSA G2 PRACTICE EXAM & G2 EXAM PREP ONTARIO

    Quick answer

    The TSSA G2 exam (EX 9001) is Ontario's residential gas technician exam: all multiple choice, a 75% passing grade, up to 3.5 hours to write, and open-book with CSA B149.1 — per the TSSA Certification Examination Preparation Guide (version March 2, 2023). You must already hold a G3 plus documented experience before you can write it. It adds appliance service, venting categories I–IV, controls, and load calculations on top of the G3 code material, and most working G3s need 6 to 10 weeks of focused study to be exam-ready.

    Written by Anthony Verrelli, G1-licensed gas technician. Independent — not affiliated with TSSA.

    G2 EXAM AT A GLANCE

    TSSA G2 (EX 9001) exam format, passing grade, time limit, and prep time
    Exam codeEX 9001 (TSSA written exam)
    FormatAll multiple choice
    Passing grade75% (aim 90%+ on practice)
    Time limitUp to 3.5 hours
    Reference bookCSA B149.1 and B149.2 (open-book, unmarked)
    Exam feesTSSA Natural Gas & Hydrogen Fee Schedule — see tssa.org
    PrerequisiteValid G3 + documented experience
    PracticalSeparate TSSA assessment
    Typical prep time6–10 weeks focused study
    Scope after passingAppliances ≤ 400,000 BTU/h input

    Passing grade, format and time limit per the TSSA Certification Examination Preparation Guide (version March 2, 2023).

    TSSA G2 EXAM RULES — OFFICIAL REQUIREMENTS

    The facts below are taken from the TSSA Certification Examination Preparation Guide (version March 2, 2023), published by the Technical Standards and Safety Authority for the Fuels program area.

    TSSA G2 certification examination passing grade, format, time limit, structure and re-write policy
    Passing grade75% (TSSA Fuels program area)
    Question formatAll multiple choice
    Time limitUp to 3.5 hours
    Exam structureA regulatory/sector section plus technical questions specific to the G2 certificate level
    Number of questionsNot published per level — TSSA states examinations range from 50 to 165 questions across certificate types
    If you failEligible to re-write after 30 days; unsuccessful candidates receive an individual mastery report with a per-module breakdown
    FeesSet by TSSA's Natural Gas & Hydrogen Fee Schedule — non-refundable and payable per attempt, including re-writes

    Reference materials you may bring to the G2 exam

    • Technical Standards and Safety Act, 2000
    • All Fuels Regulations and Code Adoption Documents
    • CSA B149.1 — Natural Gas and Propane Installation Code
    • CSA B149.2 — Propane Storage and Handling Code
    • CSA B149.2S1 (optional supplement)
    • Reference materials must be unmarked and unaltered, except for page dividers or highlighting.
    • No electronic devices, watches, or hats are permitted in the exam room.
    • A calculator and pencils are provided at MLITSD examination centres, but not at Hub City centres — bring your own.

    Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. Fees are non-refundable and payable per attempt, including re-writes. Confirm current amounts at tssa.org before you register.

    WHAT THE G2 EXAM COVERS

    Every topic on the TSSA G2 certification exam, organized into focused study modules.

    FURNACE SYSTEMS

    High-efficiency and mid-efficiency furnaces. Components, sequences of operation, troubleshooting.

    BOILER OPERATION

    Hydronic heating, steam basics, safety controls, aquastats, zone valves.

    VENTING CATEGORIES I–IV

    Positive and negative pressure venting. B-vent, direct vent, power vent, and sidewall termination rules.

    CONTROLS & WIRING

    Thermostats, gas valves, flame sensors, ignition systems, limit controls, and wiring diagrams.

    COMBUSTION AIR CALCULATIONS

    Confined vs unconfined spaces, direct air supply, louver sizing per CSA B149.1.

    LOAD CALCULATIONS

    Heat loss/gain, BTU sizing, and pipe sizing for residential gas systems.

    What is on the G2 exam?

    G2 layers appliance-level competence on top of the G3 code foundation. Expect heavier weighting on venting, controls, and load calculations.

    • Residential and light commercial gas appliances
    • Venting categories I, II, III, IV — including forced-draft and condensing
    • Gas controls, safety devices, and combustion analysis
    • Load calculations and appliance sizing
    • Service, diagnostics, and troubleshooting
    • Deeper CSA B149.1 sections — regulator venting, chimney sizing, purging
    • Ontario Regulation 212/01 licensing and reporting obligations

    How to study for the G2 exam

    1. Weeks 1–2 — appliance systems. Furnaces and boilers: components and sequence of operation, then questions on each.
    2. Weeks 3–4 — venting categories I–IV. The single biggest source of lost marks. Work vent sizing tables until lookups are automatic.
    3. Weeks 5–6 — controls and combustion air. Ignition systems, flame supervision, louver and confined-space calculations.
    4. Weeks 7–8 — load calculations and code drills. Mixed-topic sets only; the real exam jumps between topics.
    5. Final week — timed mocks. Two full-length mocks. If you can't hit 90% under time, push the booking a week.

    Where G2 candidates lose points

    • Confusing Category II and IV venting requirements and termination clearances
    • Reading the wrong vent or pipe sizing table column under time pressure
    • Control circuit questions — flame supervision and limit logic
    • Combustion air for confined spaces, especially louver free-area math
    • Over-indexing on memorisation instead of fast code lookup

    How hard is the G2 exam?

    Meaningfully harder than G3. The failure pattern is candidates who over-index on code memorisation and under-prepare for venting category diagnostics and control circuit questions. Practise questions across every topic group, not just the ones you find easy.

    What is the passing grade for the G2 exam?

    75%. TSSA sets the passing grade for Fuels program area certification examinations at 75%, per the TSSA Certification Examination Preparation Guide (version March 2, 2023). Every question is multiple choice, you get up to 3.5 hours, and the paper is split into a regulatory/sector section plus technical questions specific to the G2 level. Aim for 90%+ on practice tests so a nervous day still passes cleanly. If you come up short you can re-write after 30 days, and TSSA sends unsuccessful candidates an individual mastery report broken down by module. Confirm current details at tssa.org before your exam date.

    What code book do I need for the G2 exam?

    CSA B149.1 (Natural Gas and Propane Installation Code), current edition, plus familiarity with B149.2 for propane-specific rules. Know your table of contents — the exam rewards candidates who can locate the correct clause fast. See CSA B149.1 practice questions explained.

    Related G2 resources

    TSSA G2 exam questions bank · Challenging the G2 exam in Ontario · Free G2 practice quiz

    Still on G3? Start with the free TSSA G3 practice exam. Going the other way, see the TSSA G1 practice exam prep or the full ladder in how to become a gas technician in Ontario.

    TSSA G2 EXAM FAQ

    +Is there a free TSSA G2 practice exam?

    Yes. Flamepath's G2 practice exam and full G2 question bank are free right now — no card required. Start with the free G2 practice quiz, then work through the G2 modules with CSA B149.1 answer explanations.

    +What is the passing grade for the TSSA G2 exam?

    75%. TSSA sets the passing grade for Fuels program area certification examinations at 75%, per the TSSA Certification Examination Preparation Guide (version March 2, 2023). Aim for 90%+ on practice tests so a nervous day still clears the bar.

    +How long do you get to write the TSSA G2 exam?

    Up to 3.5 hours. All questions are multiple choice, and the exam includes a regulatory/sector section plus technical questions specific to your certificate level (TSSA Certification Examination Preparation Guide (version March 2, 2023)).

    +How many questions are on the TSSA G2 exam?

    TSSA does not publish a fixed per-level question count. The TSSA Certification Examination Preparation Guide (version March 2, 2023) states that certification examinations range from 50 to 165 multiple-choice questions depending on the certificate type, so treat any specific "G2 has X questions" figure you see online as unverified.

    +What happens if you fail the TSSA G2 exam?

    You are eligible to re-write after 30 days. Unsuccessful candidates receive an individual mastery report showing a breakdown of results by module, so you know exactly which topics to rebuild before re-writing (TSSA Certification Examination Preparation Guide (version March 2, 2023)). Fees are payable per attempt, including re-writes.

    +What reference materials can you bring into the G2 exam?

    Technical Standards and Safety Act, 2000; All Fuels Regulations and Code Adoption Documents; CSA B149.1 — Natural Gas and Propane Installation Code; CSA B149.2 — Propane Storage and Handling Code; CSA B149.2S1 (optional supplement). Materials must be unmarked and unaltered except for page dividers or highlighting. No electronic devices, watches, or hats are permitted. Calculators and pencils are provided at MLITSD examination centres but not at Hub City centres — bring your own (TSSA Certification Examination Preparation Guide (version March 2, 2023)).

    +How much does the TSSA G2 exam cost?

    Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. Fees are non-refundable and payable per attempt, including re-writes. Check tssa.org for current figures — the schedule is updated periodically, so we don't publish dollar amounts here.

    +How hard is the G2 exam?

    Meaningfully harder than G3. The G2 exam adds appliance-specific troubleshooting, venting categories I–IV in depth, controls, and load calculations on top of the G3 code material. Most working G3s need 6–10 weeks of study to be comfortable.

    +What is on the G2 exam?

    Residential and light commercial appliances, venting categories I–IV, gas controls and safety devices, load calculations, service and diagnostics, plus deeper CSA B149.1 and Ontario Regulation 212/01 content. TSSA structures the exam as a regulatory/sector section plus technical questions specific to the G2 level.

    +How much work experience do I need before writing the G2?

    TSSA requires documented on-the-job experience under a G2 or G1 gas technician, in addition to holding a valid G3. Confirm the current hour requirement with TSSA or your employer sponsor before applying.

    +Can I skip the G3 and challenge the G2 directly?

    No. The G3 is a prerequisite for the G2 in Ontario. You must hold a valid G3 certificate and log qualifying experience before writing the EX 9001.

    +What appliances can a G2 legally work on?

    A G2 gas technician can install, service, and maintain gas appliances up to 400,000 BTU/h input per appliance — typical residential furnaces, boilers, water heaters, ranges, fireplaces, and pool heaters.

    +What code book do I need for the G2 exam?

    CSA B149.1 (Natural Gas and Propane Installation Code), current edition, plus CSA B149.2 for propane. You may also bring the Technical Standards and Safety Act, 2000 and all Fuels Regulations and Code Adoption Documents, with B149.2S1 optional. Books must be unmarked and unaltered except for page dividers or highlighting.

    RELATED G2 READING

    WRITTEN BY ANTHONY VERRELLI

    TSSA G1 Licensed Gas Technician · 6+ years field experience at Enbridge Gas. Founder of Flamepath. Content mapped to CSA B149.1 and Ontario Regulation 212/01 based on hands-on commissioning, service, and inspection work.

    DRILL THE G2 QUESTION BANK FREE

    100% free. No credit card. Study from your phone in 10-minute sessions.