Pillar guide · Reviewed 2026-09-08

    HOW TO BECOME A GAS TECHNICIAN IN ONTARIO

    Quick answer

    To become a licensed gas technician in Ontario you climb three TSSA tiers in order: G3, then G2, then G1. You start by passing the G3 exam (EX 9000), an open challenge exam anyone can register for — no college program or employer required. From there you work under supervision, log training hours, and challenge G2; most people go from zero to G2 in 1–2 years.

    What each licence lets you do

    Ontario gas work is regulated by the Technical Standards and Safety Authority (TSSA) under Ontario Regulation 212/01. There are three gas technician tiers, and you must hold them in order — a "Class 3 licence" (G3) is the entry ticket, G2 is the everyday working licence, and G1 is the top tier for commercial and industrial systems.

    TIERSCOPE OF WORKTRAINING PATHTYPICAL WAGE (ON) *EXAM FORMAT
    G3Domestic gas appliances up to 400,000 BTU/h under supervision.Self-study or short course. Open challenge exam (EX 9000) with TSSA.$26–$32/hrAll multiple choice, written + practical, 75% passing grade.
    G2Residential + light commercial appliances up to 400,000 BTU/h, unsupervised.G3 first, then G2 training hours + EX 9001 exam.$32–$48/hrAll multiple choice, written + practical, 75% passing grade.
    G1All gas appliances — commercial/industrial, high-pressure gas trains, BMS.G2 first, then G1 training + written and practical G1 exams.$45–$62/hrAll multiple choice plus practical, 75% passing grade.

    In plain English: G3 is the entry ticket that lets you work on residential gas appliances under a licensed technician. G2 is the everyday residential and light commercial licence — this is the ticket most working Ontario gas techs hold. G1 unlocks commercial and industrial work including high-pressure gas trains and burner management systems, with the highest pay and the hardest exam. You cannot skip tiers — G3 is required before G2, and G2 is required before G1.* Wage figures are general ranges, not official per-tier data. Job Bank Canada reports Ontario gas fitters (NOC 72302) at $26.00/hr low, $36.06/hr median, and $62.50/hr high (reference period 2023–2024, Labour Force Survey — Statistics Canada); it does not publish wages by licence tier, so the per-tier ranges above are estimates based on that overall scale and Ontario shop postings. Source: Job Bank — Gas fitter wages in Ontario. Confirm current TSSA fees and exam formats at tssa.org.

    The two routes: in-class program vs. challenging the exam

    There are two legitimate ways to reach your first licence, and which one fits depends on your situation:

    IN-CLASS PROGRAM

    Colleges like George Brown, Humber, Mohawk, and Conestoga run gas technician diploma programs with classroom theory, lab time, and sometimes co-op placements. Best if you want structured training and a credential employers recognize on day one — at a significant tuition cost.

    CHALLENGE THE EXAM

    The G3 exam (EX 9000) is an open challenge: register with TSSA, self-study the syllabus, and write it. No course required. Best if you're disciplined, coming from a related trade, or want the cheapest, fastest route in.

    Both routes end at the same TSSA exam — the licence is identical either way. See our full breakdown of the G3 open challenge process in Ontario and how online prep compares to a college program.

    The step-by-step path from zero to G3, G2, and G1

    Step 1 — Zero to G3

    1. Study the G3 syllabus. Cover gas properties, safety, CSA B149.1, Ontario Regulation 212/01, combustion, venting, and pipe sizing. Most self-study candidates need 4–8 weeks of consistent practice questions.
    2. Register for the G3 exam (EX 9000) with TSSA. The G3 exam is an open challenge — anyone in Ontario can register, no college prerequisite and no employer required. Pay the TSSA exam fee and pick a date.
    3. Pass the written exam (75% passing grade). Roughly 100 multiple-choice questions, open book with the CSA B149.1. Aim for 90%+ on practice tests before sitting the real one.
    4. Complete the practical assessment. TSSA assigns a Training and Certification Advisor to evaluate hands-on skills: installation, leak testing, and purging.

    When you're ready to start drilling, the free TSSA G3 practice exam mirrors the real format, and the G3 cheat sheet condenses the code sections that show up most.

    Step 2 — G3 to G2

    1. Get hired and log G2 training hours. With your G3 certificate, work under a licensed G2 or G1 technician and accumulate the documented hours G2 requires. Most apprentices take 12–24 months.
    2. Challenge the G2 exam (EX 9001). Written plus practical. G2 removes the supervision requirement and covers residential and light commercial work up to 400,000 BTU/h.

    Prepare with the TSSA G2 practice exam and G2 exam prep guide, and see what the questions actually look like in our TSSA G2 exam questions breakdown.

    Step 3 — G2 to G1

    1. Upgrade to G1 when ready. After documented G2 experience, challenge the G1 written and practical exams to unlock commercial and industrial gas work.

    The G1 is the hardest of the three — high-pressure gas trains, burner management systems, and commercial venting. Follow the G2 to G1 study path and drill with the TSSA G1 practice exam.

    How much does it cost?

    Your costs fall into two buckets: TSSA exam and certificate fees, and training costs (optional for G3, effectively covered by work hours for G2 and G1). Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. They are non-refundable and payable per attempt, including re-writes, so a failed exam means paying again. Self-study G3 candidates pay the exam fee plus study materials; college diploma programs add thousands in tuition. Check the current fee schedule at tssa.org before budgeting — the schedule is updated periodically, so we don't publish dollar amounts here.

    Where the exams fit — and where to prep

    Every tier ends with a TSSA written exam (plus a practical assessment). The exam is the gate; training hours are the waiting room. Each level has its own prep track:

    All three tracks are free to start. For the regulatory side, see what the CSA B149.1 gas code actually covers and how the EX 9000 exam is structured.

    What jobs can I do with a G3 licence?

    G3 holders work as apprentice gas techs at residential HVAC shops, assisting a G2 or G1 on furnaces, boilers, water heaters, and gas ranges. G3 is what shops require to hire you into the trade — the Flamepath apprenticeships board lists G3-friendly openings across the GTA and Durham region.

    Flamepath vs. a college gas technician course

    Colleges provide the accredited classroom and lab training some employers prefer. Flamepath is not an accredited training provider — it is an exam prep and practice layer on top, drilling the CSA B149.1 and O. Reg. 212/01 questions that actually appear on TSSA exams. Most working techs use both: a course for structured training, a prep tool for the exam.

    FREQUENTLY ASKED QUESTIONS

    +How long does it take to become a gas technician in Ontario?

    Plan on 4–8 weeks of study to pass the G3 exam, then 12–24 months of supervised work and training hours to reach G2. G1 typically comes after several more years of experience. Zero to fully licensed G2: roughly 1–2 years for most people.

    +What does it cost to get a gas technician license in Ontario?

    TSSA charges exam and certificate fees per tier, plus whatever you spend on training. Self-study G3 candidates pay the exam fee and study materials only; college diploma programs run into the thousands. Confirm the current TSSA fee schedule at tssa.org before registering — fees change.

    +Do I need an employer before I start?

    No. You can study for and write the G3 exam (EX 9000) with no employer — it is an open challenge exam. You need an employer afterward, because G2 requires documented training hours working under a licensed G2 or G1 technician.

    +Can I skip G3 and go straight to G2?

    No. Ontario's gas technician certification is sequential: G3 is required before G2, and G2 is required before G1. There is no way to challenge a higher tier without holding the one below it.

    +What is a Class 3 (G3) licence in Ontario?

    G3 — Gas Technician 3 — is the entry-level Ontario gas licence. It lets you work on domestic gas appliances up to 400,000 BTU/h under the supervision of a G2 or G1 technician. It is what shops require to hire you into the trade.

    +Is the G3 exam open book?

    TSSA permits the current edition of the CSA B149.1 code book in the exam room. Open book only helps if you can find the right clause fast — most candidates who fail know the material but cannot navigate the codebook under time pressure.

    +How do I find a gas fitter apprenticeship in Ontario?

    Apply directly to residential HVAC and gas service shops in your region — many post explicitly for G3 holders. The Flamepath apprenticeships board also lists G3-friendly openings across the GTA and Durham region.

    WRITTEN BY ANTHONY VERRELLI

    TSSA G1 Licensed Gas Technician · 6+ years field experience at Enbridge Gas. Founder of Flamepath. Content mapped to CSA B149.1 and Ontario Regulation 212/01 based on hands-on commissioning, service, and inspection work.

    READY TO START? TRY THE FREE G3 SAMPLE QUIZ.

    100% free. No credit card. Study from your phone in 10-minute sessions.