COMMERCIAL & INDUSTRIAL — TSSA G1

    TSSA G1 PRACTICE EXAM & G1 EXAM PREP ONTARIO

    Quick answer

    The TSSA G1 is Ontario's top gas technician certification, covering high-pressure gas trains, commercial and industrial burners, burner management systems, commercial venting, and commissioning under CSA B149.1 and Ontario Regulation 212/01. The passing grade is 75%, every question is multiple choice, and you get up to 3.5 hours — per the TSSA Certification Examination Preparation Guide (version March 2, 2023). TSSA does not publish a per-level question count; its guide gives a range of 50 to 165 questions across all certificate types. You must already hold a G2 with documented experience, and most G2-certified fitters need 60 to 90 days of daily practice questions to be ready.

    Built for G2-certified Ontario gas fitters going for their G1. Free practice questions, timed mock exams, and a readiness signal that tells you when you're ready to book — so you don't waste a single study hour.

    Aligned with CSA B149.1 & Ontario Regulation 212/01.

    WHAT THE TSSA G1 EXAM COVERS

    Every topic on the Ontario G1 gas fitter exam, broken into focused study modules.

    HIGH-PRESSURE GAS TRAINS

    Train layout, double block & bleed, pressure regulators, safety shutoffs, and commercial sizing.

    BURNER MANAGEMENT SYSTEMS

    BMS sequence of operation, flame supervision, purge cycles, and lockout logic for commercial burners.

    POWER & INDUSTRIAL BURNERS

    Forced-draft burners, modulating control, combustion tuning, and cross-checks against CSA B149.1.

    COMMERCIAL VENTING

    Category III & IV systems, common venting, draft considerations, and breeching sizing.

    COMMISSIONING & START-UP

    Pre-fire checks, leak testing, commissioning reports, and TSSA documentation requirements.

    CODE APPLICATION — B149.1

    How code clauses map to G1 exam questions. The exact sections that show up most.

    G1 EXAM AT A GLANCE

    TSSA G1 exam scope, passing grade, time limit, prerequisites, and prep time
    CertificationTSSA G1 — Gas Technician 1
    FormatAll multiple choice, plus a separate practical assessment
    Passing grade75% (aim 90%+ on practice)
    Time limitUp to 3.5 hours
    Reference bookCSA B149.1, B149.2, B149.3-10 (open-book, unmarked)
    Exam feesTSSA Natural Gas & Hydrogen Fee Schedule — see tssa.org
    PrerequisiteValid G2 + documented experience
    Typical prep time60–90 days of daily study
    Scope after passingHigh-pressure, commercial and industrial gas systems

    Passing grade, format and time limit per the TSSA Certification Examination Preparation Guide (version March 2, 2023).

    Working up the ladder? Start with the free TSSA G3 practice exam or the TSSA G2 practice exam and G2 exam prep.

    TSSA G1 EXAM RULES — OFFICIAL REQUIREMENTS

    The facts below are taken from the TSSA Certification Examination Preparation Guide (version March 2, 2023), published by the Technical Standards and Safety Authority for the Fuels program area.

    TSSA G1 certification examination passing grade, format, time limit, structure and re-write policy
    Passing grade75% (TSSA Fuels program area)
    Question formatAll multiple choice
    Time limitUp to 3.5 hours
    Exam structureA regulatory/sector section plus technical questions specific to the G1 certificate level
    Number of questionsNot published per level — TSSA states examinations range from 50 to 165 questions across certificate types
    If you failEligible to re-write after 30 days; unsuccessful candidates receive an individual mastery report with a per-module breakdown
    FeesSet by TSSA's Natural Gas & Hydrogen Fee Schedule — non-refundable and payable per attempt, including re-writes

    Reference materials you may bring to the G1 exam

    • Technical Standards and Safety Act, 2000
    • All Fuels Regulations and Code Adoption Documents
    • CSA B149.1 — Natural Gas and Propane Installation Code
    • CSA B149.2 — Propane Storage and Handling Code
    • CSA B149.3-10 — Field approval of fuel-related components
    • CSA B149.2S1 (optional supplement)
    • Reference materials must be unmarked and unaltered, except for page dividers or highlighting.
    • No electronic devices, watches, or hats are permitted in the exam room.
    • A calculator and pencils are provided at MLITSD examination centres, but not at Hub City centres — bring your own.

    Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. Fees are non-refundable and payable per attempt, including re-writes. Confirm current amounts at tssa.org before you register.

    G2 GAS FITTER UPGRADING TO G1?

    You already know the residential side. G1 is a different beast — high-pressure trains, BMS, and commercial venting that the G2 barely touched. Most G2 fitters underestimate the gas train and BMS sections and lose the exam there.

    Flamepath drills you on exactly the topics G2 fitters miss most on the G1 — so you walk in knowing where the trap questions live.

    TSSA G1 EXAM FAQ

    Straight answers to what G2 fitters ask before they book.

    What's on the TSSA G1 gas fitter exam?+
    High-pressure gas trains, commercial and industrial burners, BMS (burner management systems), commercial venting, commissioning, and code application from CSA B149.1 and Ontario Regulation 212/01. TSSA structures the paper as a regulatory/sector section plus technical questions specific to the G1 level.
    What is the passing grade for the TSSA G1 exam?+
    75%. TSSA sets the passing grade for Fuels program area certification examinations at 75%, per the TSSA Certification Examination Preparation Guide (version March 2, 2023). Aim for 90%+ on practice tests so a nervous day still clears the bar.
    How long do you get to write the TSSA G1 exam?+
    Up to 3.5 hours. All questions are multiple choice, and the exam includes a regulatory/sector section plus technical questions specific to your certificate level (TSSA Certification Examination Preparation Guide (version March 2, 2023)).
    How many questions are on the TSSA G1 exam?+
    TSSA does not publish a fixed per-level question count. The TSSA Certification Examination Preparation Guide (version March 2, 2023) states that certification examinations range from 50 to 165 multiple-choice questions depending on the certificate type, so treat any specific "G1 has X questions" figure you see online as unverified.
    What happens if you fail the TSSA G1 exam?+
    You are eligible to re-write after 30 days. Unsuccessful candidates receive an individual mastery report showing a breakdown of results by module, so you know exactly which topics to rebuild before re-writing (TSSA Certification Examination Preparation Guide (version March 2, 2023)). Fees are payable per attempt, including re-writes.
    What reference materials can you bring into the G1 exam?+
    Technical Standards and Safety Act, 2000; All Fuels Regulations and Code Adoption Documents; CSA B149.1 — Natural Gas and Propane Installation Code; CSA B149.2 — Propane Storage and Handling Code; CSA B149.3-10 — Field approval of fuel-related components; CSA B149.2S1 (optional supplement). Materials must be unmarked and unaltered except for page dividers or highlighting. No electronic devices, watches, or hats are permitted. Calculators and pencils are provided at MLITSD examination centres but not at Hub City centres — bring your own (TSSA Certification Examination Preparation Guide (version March 2, 2023)).
    How much does the TSSA G1 exam cost?+
    Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. Fees are non-refundable and payable per attempt, including re-writes. Check tssa.org for current figures — the schedule is updated periodically, so we don't publish dollar amounts here.
    How long should I study for the G1 exam?+
    Most G2-certified fitters need 60–90 days of consistent prep — about 30 minutes a day. If you only touch it on weekends, plan for 4–6 months. The G1 is dense, but it builds on what you already know from G2.
    Is Flamepath good for G1 exam prep?+
    Flamepath is built for G2-certified Ontario gas fitters going for their G1. Every question is mapped to CSA B149.1 and the actual TSSA G1 exam blueprint. No filler, no classroom — study from your phone between calls.
    What's the difference between G2 and G1 certification in Ontario?+
    G2 covers residential and light commercial gas systems up to 7 psi. G1 covers high-pressure and commercial/industrial work — power burners, gas trains, BMS, commercial boilers. G1 is the top tier and unlocks higher-paying commercial installs.
    How do I know I'm ready to book my G1 exam?+
    When you're hitting 90%+ on Flamepath's mock G1 exam two sessions in a row, you're clear of the 75% TSSA passing grade with real margin. The platform tells you when to book — no guessing.
    How hard is the TSSA G1 exam?+
    It's the hardest of the three. Pass rates are lower than G3 and G2 because the material is denser and the safety stakes are higher. Most failures come from skimming gas trains and BMS — Flamepath drills both until they're automatic.
    What is the G1 gas fitter exam pass rate in Ontario?+
    TSSA does not publish official pass rates, but field reports put first-time G1 pass rates noticeably below G2. Candidates who study daily and use a structured tool consistently outperform those reading the code book cover-to-cover.

    READY TO PASS THE G1?

    Stop second-guessing. Start drilling. Every G1 module and mock exam is free right now — no card, no subscription.

    RELATED G1 READING

    WRITTEN BY ANTHONY VERRELLI

    TSSA G1 Licensed Gas Technician · 6+ years field experience at Enbridge Gas. Founder of Flamepath. Content mapped to CSA B149.1 and Ontario Regulation 212/01 based on hands-on commissioning, service, and inspection work.