TSSA G3 · Ontario · Reviewed 2026-09-08

    FREE TSSA G3 PRACTICE EXAM & G3 EXAM PREP ONTARIO

    Quick answer

    The TSSA G3 (EX 9000) is Ontario's entry-level gas technician exam: all multiple choice, a 75% passing grade, up to 3.5 hours to write, and open-book with CSA B149.1 — per the TSSA Certification Examination Preparation Guide (version March 2, 2023). No college program is required; it is a challenge exam you can register for directly with TSSA. Most candidates pass after 4 to 8 weeks of focused study, and this page gives you a free 20-question G3 practice exam with CSA B149.1 answer explanations to test where you stand.

    Below: the free practice exam, the exact topic breakdown, the five-step licensing process, a study plan, and where candidates lose points. Everything on Flamepath is free right now — no card required.

    Written by Anthony Verrelli, G1-licensed gas technician. Independent — not affiliated with TSSA.

    Free · 20 questions · No signup

    FREE TSSA G3 PRACTICE EXAM — 20 QUESTIONS

    20 multiple-choice questions written to match the format, topic weights, and difficulty of the real TSSA G3 (EX 9000) exam. Explanations reference CSA B149.1 and Ontario Regulation 212/01. Pass mark: 15/20 (75%).

    Answer all 20 questions, then click Score my test to see your result, topic breakdown, and what to study next.

    Answered 0 / 20
    1. Question 1 of 20 · VentingRef: CSA B149.1

      What is the minimum clearance to combustibles for a Type B gas vent connector, unless the appliance manufacturer specifies otherwise?

    2. Question 2 of 20 · PipingRef: CSA B149.1

      A gas piping system is being pressure-tested. What is the minimum test duration once the required pressure is reached?

    3. Question 3 of 20 · Combustion

      Natural gas has a specific gravity of approximately:

    4. Question 4 of 20 · Combustion

      What is the flammability range of natural gas in air, by volume?

    5. Question 5 of 20 · CodesRef: CSA B149.1

      A regulator relief vent terminal must be located a minimum of what distance from a building air intake?

    6. Question 6 of 20 · Combustion

      Propane has a specific gravity of approximately:

    7. Question 7 of 20 · CodesRef: O. Reg 212/01

      Under Ontario Regulation 212/01, who is authorized to work on gas piping and appliances in Ontario?

    8. Question 8 of 20 · Safety

      What is the primary purpose of purging a gas piping system after installation?

    9. Question 9 of 20 · Venting

      A Category I gas appliance is defined as:

    10. Question 10 of 20 · CombustionRef: CSA B149.1

      What is the minimum size of combustion air opening required for a confined space, per CSA B149.1 (typical method)?

    11. Question 11 of 20 · PipingRef: CSA B149.1

      The maximum working pressure in a residential building for natural gas is typically limited to:

    12. Question 12 of 20 · Safety

      What colour is the odorant added to natural gas commonly associated with?

    13. Question 13 of 20 · PipingRef: CSA B149.1

      A drip leg (dirt pocket) on a gas line is installed:

    14. Question 14 of 20 · Combustion

      Complete combustion of natural gas produces:

    15. Question 15 of 20 · PipingRef: CSA B149.1

      The minimum burial depth for underground gas piping in a private property, per CSA B149.1, is typically:

    16. Question 16 of 20 · CodesRef: O. Reg 212/01

      What is a G3 gas technician authorized to work on, in Ontario?

    17. Question 17 of 20 · AppliancesRef: CSA B149.1

      An appliance shutoff valve must be installed:

    18. Question 18 of 20 · PipingRef: CSA B149.1

      Which of the following is NOT approved for use as a gas piping material inside a building?

    19. Question 19 of 20 · Safety

      The safe carbon monoxide (CO) level in ambient air for continuous exposure is generally considered to be:

    20. Question 20 of 20 · CodesRef: CSA B149.1 / O. Reg 212/01

      What is the primary reference code for gas installations in Ontario?

    How to use this G3 practice test

    Treat it like the real thing. Sit down with CSA B149.1 open beside you, answer all 20 questions in one sitting, and only score when you're finished. Then read every explanation — especially on the questions you got right by guessing.

    How this compares to the real TSSA G3 exam

    The real TSSA G3 (EX 9000) is all multiple choice with a 75% pass mark. This is a 20-question representative sample — same format, same topic weights, same difficulty band. If you can consistently hit 90%+ on practice tests like this, you're ready to book.

    What's next after this practice test

    If you scored below 75%, spend a week on your two weakest topics before retesting. If you scored 70–89%, drill the weakest topic and take a full-length timed mock. If you scored 90%+, book the real exam. Keep going with the full free G3 practice quiz and the G3 cheat sheet.

    G3 EXAM REQUIREMENTS AT A GLANCE

    TSSA G3 (EX 9000) exam format, passing grade, time limit, and prep time
    Exam codeEX 9000 (TSSA written exam)
    FormatAll multiple choice
    Passing grade75% (aim 90%+ on practice)
    Time limitUp to 3.5 hours
    Reference bookCSA B149.1 (open-book, unmarked)
    Exam feesTSSA Natural Gas & Hydrogen Fee Schedule — see tssa.org
    PrerequisiteNone — challenge exam
    PracticalSeparate TSSA assessment
    Typical prep time4–8 weeks focused study
    Scope after passingResidential ≤ 400,000 BTU/hr, supervised

    Passing grade, format and time limit per the TSSA Certification Examination Preparation Guide (version March 2, 2023).

    TSSA G3 EXAM RULES — OFFICIAL REQUIREMENTS

    The facts below are taken from the TSSA Certification Examination Preparation Guide (version March 2, 2023), published by the Technical Standards and Safety Authority for the Fuels program area.

    TSSA G3 certification examination passing grade, format, time limit, structure and re-write policy
    Passing grade75% (TSSA Fuels program area)
    Question formatAll multiple choice
    Time limitUp to 3.5 hours
    Exam structureA regulatory/sector section plus technical questions specific to the G3 certificate level
    Number of questionsNot published per level — TSSA states examinations range from 50 to 165 questions across certificate types
    If you failEligible to re-write after 30 days; unsuccessful candidates receive an individual mastery report with a per-module breakdown
    FeesSet by TSSA's Natural Gas & Hydrogen Fee Schedule — non-refundable and payable per attempt, including re-writes

    Reference materials you may bring to the G3 exam

    • Technical Standards and Safety Act, 2000
    • All Fuels Regulations and Code Adoption Documents
    • CSA B149.1 — Natural Gas and Propane Installation Code
    • CSA B149.2 — Propane Storage and Handling Code
    • CSA B149.2S1 (optional supplement)
    • Reference materials must be unmarked and unaltered, except for page dividers or highlighting.
    • No electronic devices, watches, or hats are permitted in the exam room.
    • A calculator and pencils are provided at MLITSD examination centres, but not at Hub City centres — bring your own.

    Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. Fees are non-refundable and payable per attempt, including re-writes. Confirm current amounts at tssa.org before you register.

    WHAT THE TSSA G3 EXAM COVERS

    Every topic on the G3 exam, organized into focused study modules. Every version leans heavily on CSA B149.1 code-lookup questions.

    GAS PROPERTIES & SAFETY

    Natural gas vs propane characteristics, specific gravity, flammability limits, LEL/UEL, odorant requirements.

    GAS CODES & REGULATIONS

    CSA B149.1, Ontario Regulation 212/01, TSSA requirements, permits, and inspection protocols.

    COMBUSTION & AIR SUPPLY

    Complete vs incomplete combustion, primary/secondary air, combustion air calculations, confined spaces.

    VENTING SYSTEMS

    B-vent, direct vent, categories I–IV, vent sizing, common venting, chimney requirements.

    PIPE SIZING & MATERIALS

    Black iron, CSST, copper — sizing methods, pressure drop calculations, meter capacity.

    APPLIANCE INSTALLATION

    Clearances, connectors, shutoff valves, drip legs, testing procedures, purging.

    What is a G3 gas licence?

    The G3 — officially Gas Technician 3 — is the entry-level gas certification in Ontario, issued by the Technical Standards and Safety Authority (TSSA) under Ontario Regulation 212/01. It authorizes you to work on residential natural gas and propane appliances up to 400,000 BTU/hr in a single-family scope, under the supervision of a higher-licensed technician.

    Working on gas systems in Ontario without at least a G3 is illegal. Every legitimate HVAC, heating, and gas contractor verifies certification before letting anyone touch a gas line.

    Who needs a G3 licence?

    • New apprentices entering the gas trade in Ontario
    • HVAC technicians who want to service gas furnaces and water heaters
    • Plumbers moving into hydronic and combi-boiler work
    • Career switchers testing the trade before committing to full G2 / G1
    • Anyone required by an employer or insurer to hold a TSSA-issued gas ticket

    How to get your G3 gas licence in Ontario (5 steps)

    1. Study CSA B149.1 and O. Reg 212/01. Gas properties, combustion, venting categories, pipe sizing, clearances, and Ontario-specific rules. Use free TSSA G3 practice exam questions that map to code clauses so you learn where to look, not just what to memorize.
    2. Register the EX 9000 written exam with TSSA. Book at tssa.org. No college program or employer referral is required — see the G3 open challenge process.
    3. Pass with 75%. All questions are multiple choice and you get up to 3.5 hours; CSA B149.1 is open-book but must be unmarked. TSSA doesn't publish a per-level question count — its guide gives a 50 to 165 range across certificate types. Aim for 90%+ on practice tests so exam-day nerves still leave you passing. Fail and you can re-write after 30 days, with a per-module mastery report showing where you lost marks (TSSA Certification Examination Preparation Guide (version March 2, 2023)).
    4. Complete the practical assessment. TSSA schedules it with a Training and Certification Advisor. Covers leak testing, purging, and appliance installation basics.
    5. Apply to TSSA for your G3 certificate. Proof of written plus practical passes, and the certificate fee. Typically issued within a few weeks.

    How to pass the G3 exam: a 4-week study plan

    1. Week 1 — gas properties, safety, combustion. 20 minutes a day of questions, then read the clause behind every miss.
    2. Week 2 — CSA B149.1 clearances and appliance installation. Tab your code book as you go.
    3. Week 3 — venting categories and pipe sizing. These carry the most trap questions; work the tables until lookups are automatic.
    4. Week 4 — full timed mocks. Two full-length mocks under exam conditions. If you can't hit 90%, delay the booking a week.

    Where candidates lose points

    • Venting. Mixing up Category I–IV requirements and vent connector clearances.
    • Pipe sizing. Reading the wrong column of a sizing table under time pressure.
    • Clearances. Quoting manufacturer values where the code default applies, and vice versa.
    • Pressure testing. Guessing hold times and test pressures instead of looking them up.
    • Studying only theory. The exam tests code lookup speed, not trivia recall.
    Free download

    Get the free G3 cheat sheet

    One-page PDF: every clearance, gas property, pressure test spec, and combustion formula you need to memorize. We'll email it.

    No spam. Unsubscribe anytime. We never sell emails.

    How difficult is the G3 exam?

    Fair but detail-heavy. The trap is memorising the wrong things — the exam tests your ability to look up and apply CSA B149.1 clearances, venting rules, and pipe sizing tables under time pressure. Most candidates who fail once pass the rewrite after a focused review of missed topics.

    What jobs can you get after passing the G3?

    • Residential HVAC installer helper (furnaces, water heaters, gas fireplaces)
    • New-construction gas installer (subdivision rough-ins)
    • Apprentice service technician at a heating & cooling contractor
    • Hot-water tank / tankless installer
    • Propane installer trainee (with B149.2 exposure)

    Starting wages in Ontario typically run $22–$28/hr for G3-only techs, moving up sharply once you log G2 hours. See the Ontario gas technician salary guide for current numbers by tier and region.

    What is the next step after G3?

    The G2 (EX 9001). It expands your scope to commercial appliances up to 400,000 BTU/hr and typically raises your rate sharply. Start with the TSSA G2 practice exam and G2 exam prep guide, then the TSSA G1 practice exam prep once you hold your G2.

    Related G3 resources

    G3 exam questions Ontario cheat sheet · G3 open challenge process · CSA B149.1 practice questions explained · Full G3 → G2 → G1 career path · Ontario gas apprenticeships

    TSSA G3 EXAM FAQ

    +Is there a free TSSA G3 practice exam?

    Yes. This page has a free 20-question TSSA G3 practice exam with answer explanations and CSA B149.1 references — no signup and no card. Flamepath also gives you the full G3 question bank and timed mock exams free.

    +What is the passing grade for the TSSA G3 exam?

    75%. TSSA sets the passing grade for Fuels program area certification examinations at 75%, per the TSSA Certification Examination Preparation Guide (version March 2, 2023). Aim for 90%+ on practice tests so a nervous day still clears the bar.

    +How long do you get to write the TSSA G3 exam?

    Up to 3.5 hours. All questions are multiple choice, and the exam includes a regulatory/sector section plus technical questions specific to your certificate level (TSSA Certification Examination Preparation Guide (version March 2, 2023)).

    +How many questions are on the TSSA G3 exam?

    TSSA does not publish a fixed per-level question count. The TSSA Certification Examination Preparation Guide (version March 2, 2023) states that certification examinations range from 50 to 165 multiple-choice questions depending on the certificate type, so treat any specific "G3 has X questions" figure you see online as unverified.

    +What happens if you fail the TSSA G3 exam?

    You are eligible to re-write after 30 days. Unsuccessful candidates receive an individual mastery report showing a breakdown of results by module, so you know exactly which topics to rebuild before re-writing (TSSA Certification Examination Preparation Guide (version March 2, 2023)). Fees are payable per attempt, including re-writes.

    +What reference materials can you bring into the G3 exam?

    Technical Standards and Safety Act, 2000; All Fuels Regulations and Code Adoption Documents; CSA B149.1 — Natural Gas and Propane Installation Code; CSA B149.2 — Propane Storage and Handling Code; CSA B149.2S1 (optional supplement). Materials must be unmarked and unaltered except for page dividers or highlighting. No electronic devices, watches, or hats are permitted. Calculators and pencils are provided at MLITSD examination centres but not at Hub City centres — bring your own (TSSA Certification Examination Preparation Guide (version March 2, 2023)).

    +How much does the TSSA G3 exam cost?

    Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. Fees are non-refundable and payable per attempt, including re-writes. Check tssa.org for current figures — the schedule is updated periodically, so we don't publish dollar amounts here.

    +How long should I study for the G3 exam?

    Most self-study candidates pass after 4 to 8 weeks of focused, part-time prep — about 20 to 30 minutes a day with a structured question bank. College gas technician programs run 8 to 12 weeks.

    +What is a G3 gas licence in Ontario?

    The G3 (Gas Technician 3) is the entry-level gas certification in Ontario, issued by TSSA under Ontario Regulation 212/01. It authorizes work on residential natural gas and propane appliances up to 400,000 BTU/hr under supervision.

    +Do I need college before writing the G3?

    No. The EX 9000 is a challenge exam. Anyone in Ontario can register directly with TSSA and write it without completing a college program, apprenticeship hours, or an employer referral.

    +What is the next step after the G3?

    The G2 (EX 9001), which expands scope to commercial appliances up to 400,000 BTU/hr. G2 requires documented practical hours at the G3 level before you can challenge the exam.

    +Are these real TSSA G3 exam questions?

    No — sharing actual TSSA questions is against the rules. These are original practice questions written by a G1-licensed gas technician to match the format, topic weights, and difficulty of the real EX 9000 exam.

    +How is this practice test scored?

    The real TSSA G3 exam has a 75% passing grade (TSSA Certification Examination Preparation Guide, March 2, 2023). This practice test uses the same threshold: score 15/20 or higher to pass. Aim for 90%+ on practice before booking the real exam.

    +What should I study if I fail the practice test?

    Focus on the topics you missed most. If you missed multiple venting or piping questions, that's where to spend your next week. The full FlamePath G3 course drills exactly the topics you get wrong.

    RELATED G3 READING

    WRITTEN BY ANTHONY VERRELLI

    TSSA G1 Licensed Gas Technician · 6+ years field experience at Enbridge Gas. Founder of Flamepath. Content mapped to CSA B149.1 and Ontario Regulation 212/01 based on hands-on commissioning, service, and inspection work.

    START THE FULL G3 BANK FREE

    100% free. No credit card. Study from your phone in 10-minute sessions.