USE-CASE — G2 CHALLENGE

    HOW TO CHALLENGE THE G2 GAS FITTER EXAM IN ONTARIO WITHOUT DOING A FULL APPRENTICESHIP.

    You don't need 4 years of formal apprenticeship to write the G2. You need a valid G3, the right work hours, and a study plan that actually maps to the TSSA EX 9001 exam.

    G2 ELIGIBILITY — THE REAL REQUIREMENTS

    To challenge the Ontario TSSA G2 exam (EX 9001), you generally need to:

    • Hold a valid G3 (Gas Technician 3) certificate.
    • Log the required supervised G2-scope work hours under a certified G2 or G1.
    • Submit your application and supporting documentation to TSSA.
    • Book and pay for the EX 9001 written exam.

    Always confirm current hour requirements directly with TSSA — they update them periodically.

    THE TSSA G2 PROCESS

    1. 01

      GET G3 FIRST

      No skipping the ladder. G3 is the prerequisite.

    2. 02

      LOG YOUR HOURS

      Get a G2-or-higher to sign off on your supervised work experience.

    3. 03

      APPLY FOR EX 9001

      Submit application to TSSA and book your written exam.

    4. 04

      STUDY THE RIGHT MATERIAL

      CSA B149.1, O. Reg 212/01, and applied G2 topics — venting categories I-IV, gas trains, controls, load calcs.

    5. 05

      WRITE & PASS

      TSSA passing grade is 75% (Certification Examination Preparation Guide, March 2, 2023). Aim for 90%+ on Flamepath before you walk in.

    HOW FLAMEPATH MAPS TO THE G2 EXAM

    Flamepath's G2 track covers Modules 10–24 — every domain TSSA tests on the EX 9001:

    • Furnaces, boilers & water heaters
    • Venting categories I–IV
    • Gas piping & sizing
    • Controls & safety circuits
    • Combustion air & make-up air
    • Heat pumps & hybrid systems
    • Diagnostics & troubleshooting
    • Load calculations

    Every question is tied to a clause in CSA B149.1 or O. Reg 212/01 so you're not just memorizing — you're building real code reflexes for exam day.

    GET G2-READY

    100% free. No credit card. Study from your phone in 10-minute sessions.