NEW: FRESH LOOK IN THE MODULES — 100% FREE
    Gas fitter exam prep

    THE GAS FITTER STUDY TOOL THAT ACTUALLY WORKS.

    Not a course. A study tool for G3, G2 & G1 — free, right on your phone.

    See how it works

    Tests you and shows you exactly what you got wrong.

    Free mock exam — no signup required.

    Updated for 2026 — current CSA B149.1 wording.

    TEST YOUR KNOWLEDGE

    3 exams. 163+ questions each. Pick your licence and start.

    THE SYSTEM IS STUPIDLY SIMPLE

    Study. Test. Fix mistakes. Repeat.

      PICK YOUR EXAM

      G3, G2, or G1.

      STUDY DAILY

      10 minutes. One question at a time.

      FIX WEAK SPOTS

      Mistakes resurface until they stick.

      WALK IN & PASS

      Hit 90%+. Show up ready.

    Real Student. Real Pass.
    "
    "Passed my G3. The flame path was helpful for memorization… FlamePath was very helpful and would love to use it again for G2."
    PM
    Paolo M.
    G3 Graduate
    FREE READINESS QUIZ

    ARE YOU EXAM READY?

    Gas Fitter 3 (G3)

    Take our comprehensive free quiz covering every topic in the Gas Fitter 3 (G3) exam. See if you're ready to challenge the TSSA exam — or find out where you need to study more.

    No signup required · Full question bank · All topics covered

    EVERYTHING IS FREE.

    COMMON QUESTIONS

    Straight answers. No runaround. Here's what people ask before they start.

    Do I need college for the G3?+
    No. G3 is an open challenge in Ontario — no college, no employer letter. Register with TSSA and write the G3 exam (EX 9000) at an approved testing site. Pass with 75%+, complete a practical skills assessment with a TSSA advisor, and you're licensed. Study with Flamepath first.
    How do I go from G3 to G2?+
    No college program needed. You'll need your G3 licence and a letter from your employer confirming your work experience. Once TSSA approves it, you're referred directly to write the G2 exam (EX 9001 TSSA Referral) — no college enrolment. Study Flamepath's G2 module, get your employer letter, and challenge it.
    How do I go from G2 to G1?+
    Same process as G2. Hold your G2, get employer sign-off on your experience, receive TSSA approval, and write the G1 Referral exam (EX 9002) directly. Flamepath prepares you for the written theory portion so you walk in ready.
    What's the difference between G3, G2, and G1?+
    G3 is entry level (up to 400,000 BTU/h, residential and light commercial). G2 covers up to 400,000 BTU/h residential and light commercial appliances in full scope. G1 covers commercial and industrial systems with no BTU limit, including high-pressure gas trains and burner management systems.
    How many questions are on the TSSA gas fitter exams?+
    TSSA does not publish a fixed per-level question count. Its Certification Examination Preparation Guide (version March 2, 2023) states that examinations range from 50 to 165 multiple-choice questions across certificate types, with up to 3.5 hours to write.
    What score do I need to pass?+
    The passing grade is 75% for TSSA Fuels certification exams (TSSA Certification Examination Preparation Guide, version March 2, 2023) — across G3, G2, and G1. Our goal is to get you to 90%+ on Flamepath mock exams before you walk in.
    Can I bring the CSA B149.1 code book into the TSSA exam?+
    Yes. The TSSA G3, G2, and G1 written exams are open-book. You can bring the CSA B149.1 Natural Gas and Propane Installation Code and Ontario Regulation 212/01. You cannot bring notes, phones, or study guides.
    How much does the TSSA G3 exam cost in Ontario?+
    Exam and certificate fees are set by TSSA's Natural Gas & Hydrogen Fee Schedule. They are non-refundable and payable per attempt, including re-writes. Check tssa.org for current figures — the schedule is updated periodically.
    How long should I study for the G3 exam?+
    Most candidates need 40 to 80 hours of focused study over 4 to 8 weeks. With Flamepath, 15 to 20 minutes per day for 6 weeks is typical for candidates with no gas background.
    How long should I study for the G1 exam?+
    Most G2-certified fitters need 60–90 days of consistent prep — about 30 minutes a day. If you only touch it on weekends, plan for 4–6 months.
    What happens if I fail the TSSA exam?+
    You can rewrite after a mandatory waiting period (typically 14 to 30 days) by paying the rewrite fee. Use that time to drill your weak topics on Flamepath instead of restudying from scratch.
    What's on the TSSA G1 gas fitter exam?+
    High-pressure gas trains, commercial and industrial burners, BMS (burner management systems), commercial venting, commissioning, and code application from CSA B149.1 and Ontario Regulation 212/01.
    How do I know I'm ready to book my G1 exam?+
    When you're hitting 90%+ on Flamepath's mock G1 exam two sessions in a row, you're ready. The platform tells you when to book — no guessing.
    Is Flamepath an accredited training provider?+
    No, and we're upfront about that. Flamepath is a study tool — like bar prep for law students. You use the tool to study. The certification comes from TSSA when you pass.

    Flamepath covers the theory for all three levels. The practical sign-off happens on the job — that's a trades reality, not a barrier.

    Exam registration and approval processes are managed by TSSA. Requirements may change — always verify at tssa.org before registering.

    Flamepath is an online exam prep platform for Ontario TSSA gas technician certifications (G3, G2, G1), built by a licensed G1 gas technician.

    LATEST GUIDES FROM THE BLOG

    JOIN OUR FREE FACEBOOK COMMUNITY.

    Studying for your G3, G2 or G1? Join 100s of Canadian gas fitters helping each other pass.